2012 Honda Civic Si Project Vehicle Program

Reaching out to the import community, Honda invited three independent vehicle tuners to build and display their 2012 Honda Civic Si concepts at the 2011 SEMA Show. Tuners were asked to push the limits of performance and style with their builds, and the vehicles on display demonstrate the personalized potential of the Si Coupe and Sedan.

Honda invited the tuners to tell the stories of their cars, and those details are provided below.

All modification information listed was provided by the vehicle builders and has not been confirmed by American Honda Motor Co., Inc. The modifications to these vehicles may void the manufacturers warranty, may not be legal for street driving in all 50 states and have not been specifically suggested, recommended or approved by American Honda Motor, Inc.

Company Name: Bisimoto Engineering
Name of Vehicle: Bisimoto 2012 Honda Civic Si Coupe

Vehicle Description:
Bisimoto Engineering is known worldwide for awe-inspiring street, show and race vehicles. With no fear of the unknown, Bisimoto is always on the cutting edge of automotive technology. The Bisimoto 2012 Civic Si Coupe was no exception with a 1004+ hp turbocharged, factory-based new K24Z7 powerplant, which embraces the "Civic for all people" vision: a street friendly time attack, drag, and road race flex-fuel concept chassis.

Powertrain Modifications:
Bisimoto built 2.4L K24Z7 engine
Bisimoto steel rods, turbo kit, intake gasket, injectors, and web level 2.4 camshafts
Arias forged pistons
AEM Series 2 EMS, and smart coils
MSD coil wires
NGK Iridium spark plugs
Torco Oils
Turbonetics 72mm turbocharger, blow-off, wastegate and intercooler
Golden Eagle sleeved block, and intake manifold
Griffin Radiator
Supertech valvetrain
Vibrant Vanjen clamps and stainless hardware
Holley billet fuel pump
ARP head, main, and wheel studs
K-Tuned alternator relocation, pulley and water neck kits
Portflow custom headwork
VP Racing E85R fuel
Kinsler fuel filters
ATI Engine Damper

Chassis/Suspension Modifications:
Steen roll cage
Eibach coil suspension and sway bar
Eins Gramm 18x8 aluminum wheels
Falken 215/35-18 tires
Bisimoto-spec Action 2MS Clutch
Buddy club racing steel lug nuts
StopTech brakes

Exterior Modifications:
Gatorwrap custom laminated body wrap
Type 2 graphics
Denmatic design scheme
Bisimoto Extreme Dimensions hood and aero upgrades
Burns Stainless muffler and hardware

Interior Modifications:
Buddy Club P1 racing seats and harness
Bisimoto reservoir socks
Racepack IQ3 dash
Bisimoto fighter special control box
Odyssey PC-925 dry cell battery
Rywire mil-spec harness
G&J braided lines
Rueda interior paint
Honda "First aid" kit

____________________________________________________________________________________

Company Name: Fox Marketing Cars/Mugsy's Repair
Vehicle Name: Fox Marketing 2012 Civic Si Coupe

Theme of Vehicle:
The main focus of this build was to showcase the reliability and performance capability of Honda's new K24Z7 power plant. With a properly engineered turbo kit, the new Civic Si can consistently provide an enthusiast with over 450 horsepower without blinking an eye. Because the K24Z7 is so strong from the factory, we added a new Full-Race intercooled turbo kit featuring the BorgWarner EFR turbo as seen in Honda's LMP1/LMP2 engine program and 2012 IndyCar teams. To properly and accurately tune the vehicle, Hondata FlashPro was selected to control Injector Dynamic 1000cc fuel injectors and the 255lph fuel pump, all made possible with the Chasebays Engine Harness. For additional power and durability, the stock plastic K24Z7 intake manifold was replaced with a Honda RRC intake manifold (euro Accord Type-R) sourced from ImportDPS. Since the car has these types of power numbers we need serious traction - so a 10.5 inch wide Vossen wheel with Toyo Tire will put the power to the ground. We then hand-built the widebody kit around the wheel and tire set up, and painted the civic BASF R-M Ultrasonic Blue Pearl, a new-school take on the classic Civic Si electron-blue-pearl. The interior was upgraded with Yonaka Ronin Racing Seats with factory Civic Si fabric inserts front, and rear. We hope you enjoy our vision for this new Si, and stay tuned to our Facebook and YouTube page for full dyno videos after SEMA!

Engine:
Full-Race 2012+ Civic Si Turbo Kit
Full-Race Turbo Manifold
Full-Race Intercooler w/ 2.5" Charge piping (Black Chrome finish)
Full-Race 3" Downpipe
Full-Race 3" Cat-Back Exhaust
BorgWarner EFR Turbocharger
Hondata FlashPro
Injector Dynamics 1000cc Injectors
Walbro 255lph Fuel Pump
ChaseBays Engine Harness
2006 Civic Si ECU
Yonaka Silicone Hoses
Yonaka Clamps
Competition Clutch Stage 4
Competition Clutch Flywheel
Hardware909 Billet Oil Cap
Hardware909 K Series Flat Head Bolts
Hardware909 Billet Oil Dip Stick
Custom Steel braded AC Line
Valve Cover Insert painted BASF R-M Ultrasonic Blue
Intake Manifold Cover painted BASF R-M Silverstone
Installed by: Mugsy's Repair - Gold Certified Honda Techs

Suspension/Braking:
Front: SSBC 13 inch 4 Piston Calipers
Road Magnet 1.5 inch Springs
Rear: 12 inch 2 Piston Calipers
Road Magnet 1.2 inch Springs

Wheels/Tires:

Front:
20x10.5 Vossen CV3 Brushed Aluminum with BASF R-M Carizzma Flat Black Barrels
255/30/20 Toyo Proxes 4 Tires
Yonaka Tuner Lug Nuts

Rear:
20x10.5 Vossen CV3 Brushed Aluminum with BASF R-M Carizzma Flat Black Barrels
255/35/20 Toyo Proxes 4 Tires
Yonaka Tuner Lug Nuts

Exterior:
BASF R-M Ultrasonic Blue Pearl
BASF R-M Carizzma Flat Black
BASF R-M Black
CarBodyKits.com Custom Front Bumper
CarBodyKits.com Custom 2.5 inch Fender Flares
CarBodyKits.com Custom Side Skirts
CarBodyKits.com Custom Rear Valance
Custom Carbon Front Splitter
Advan Carbon Hood
Custom Tined Taillights with BASF R-M DC5335 Clear
Custom Tinted Headlights with BASF R-M DC5335 Clear

Interior:
Yonaka Ronin Black Leather Seats with Factory Si fabric inserts
Custom Rear Black Leather with Factory Si fabric inserts

Partners:

BASF Refinish
Yonaka Motorsports
Mugsy's Repair
Full-Race Motorsports
BorgWarner Turbo Systems
Hondata
ID Fuel Injectors / T1 Race Development
Vossen Wheels
Toyo Tires
ChaseBays.com
Hardware909
SSBC Brakes
Road Magnet
Hybrid Racing
CarBodyKits.com
Advan Carbon
Honda-Tech.com
9thCivic.com

____________________________________________________________________________________

Company Name: Tjin Edition

Name of Vehicle: Tjin Edition 2012 Honda Civic Si Sedan

Vehicle Description:
The Tjin Edition Honda Civic Si Sedan was built to showcase our abilities to build an overall impressive car that can be driven daily on the streets of Southern California. We wanted our Civic Si Sedan to be able to seat four comfortably (both adults and kids), while still incorporating our signature themes into the build. The interior of our Civic Si Sedan is customized in a black leather finish with purple diamond stitch, a full audio system and a pair of Recaro kids seats. The exterior of the Tjin Edition Honda Civic Si Sedan has been completely redone by the team at Daley Visual and Wraptivo. The exterior sports a custom wrap and carbon fiber front grille, roof, wing and rear diffuser. As the Tjin Edition Honda Civic Si Sedan rolls around the streets we wanted to make sure that people stopped and stared at the one-off 19x8.5" and 19x9.5" candy orange and candy purple concave Rotiform BLQ wheels and our Si's slammed stance thanks to Function and Form.