| . | TRIMMER / BRUSHCUTTERS | STICK EDGER | |||
| . | HHT25SLTA | HHT35SLTA | HHT31SUNBA | HHE31CA | |
| E N G I N E |
Model | GX25 | GX31 | GX31 | GX31 |
| Displacement | 1.53 cu. In. (25 cc) | 1.89 cu. In. (31.0 cc) | 1.89 cu. In. (31.0 cc) | 1.89 cu. In. (31.0 cc) | |
| Fuel | Unleaded Gasoline (86 Octane or higher) |
Unleaded Gasoline (86 Octane or higher) |
Unleaded Gasoline (86 Octane or higher) |
Unleaded Gasoline (86 Octane or higher) |
|
| Fuel Tank Capacity | 16.9 fl.oz. | 22.0 fl oz. | 22.0 fl oz. | 22.0 fl oz. | |
| Carburetor | Diaphram Type w/Fuel Pump | Diaphram Type w/Fuel Pump | Diaphram Type w/Fuel Pump | Diaphram Type w/Fuel Pump | |
| Idle Speed | 3,100 +/- 200 rpm | 3,100 +/- 200 rpm | 3,100 +/- 200 rpm | 3,100 +/- 200 rpm | |
| Max. (no load) RPM** | 10,000 rpm | 10,000 rpm | 10,000 rpm | 10,000 rpm | |
| F R A M E |
Dimensions (L x W x H) |
73.5 in. x 12.7 in. x 9.6 in. | 74.2 in. x 12.8 in. x 10.6 in. | 75.3 in. x 22.9 in. x 14.6 in. | 70.7 x 13.1 x 10.4 |
|
Dry Weight
|
13.0
|
14.7
|
15.5
|
16.8
|
|
| Engine Stop Switch | Slide Type Switch | Slide Type Switch | Slide Type Switch | Slide Type Switch | |
| Throttle Control | Two Motion Trigger | Two Motion Trigger | Two Motion Trigger | Two Motion Trigger | |
| Main Pipe Diameter | 1.0 in. (25.4 mm) | 1.0 in. (25.4 mm) | 1.0 in. (25.4 mm) | 1.0 in. (25.4 mm) | |
| Main Pipe Thickness | .06 in. (Aluminum) | .06 in. (Aluminum) | .06 in. (Aluminum) | .063 in. (Aluminum) | |
| Drive Shaft | Flexible Steel Cable | Flexible Steel Cable | Flexible Steel Cable | Flex 0.25 in. | |
| Shaft Support | Nylon Support Sleeve | Nylon Support Sleeve | Nylon Support Sleeve | Nylon Support Sleeve | |
| Gear Ratio | 1.235 | 1.235 | 1.235 | 1.25 | |
| Handle | Loop Type | Loop Type | Bike Type | Loop Type | |
| Cutting Head | Semi-matic Feed-Nylon | Semi-matic Feed-Nylon | Manual Feed Head-Nylon | N/A | |
| Line Type | Ultra-Quiet | Ultra-Quiet | Ultra-Quiet | N/A | |
| Cutting Width | 17" | 17" | 17" | N/A | |
| Single Harness | Standard | Standard | NA | N/A | |
| Double Harness | Optional * | Optional * | Standard | N/A | |
| Safety Goggles | Standard | Standard | Standard | Standard | |
| 10 in. Brush Blade | 9 Inch Blade Optional*** | Optional*** | Standard | 8" with 1" Hole | |
| Blade Barrier Kit**** | Optional* | Optional* | Standard | N/A | |
* Must be used with all blade applications
** Without cutting head
*** Requires Blade Barrier Kit
**** Includes barrier, double harness and blade mounting hardware