Honda Construction Pumps Specifications

CONSTRUCTION
. WT20 WT30 WT40 WDP20 WDP30
Honda 4-stroke, Single Cylinder, Air Cooled Engine GX160
5.5 HP OHV
GX240
8.0 HP OHV
GX340
11.0 HP OHV
GX120
4.0 HP OHV
GX120
4.0 HP OHV
Displacement 163 cc 242 cc 337 cc 118 cc 118 cc
Bore and Stroke 2.7" x 1.8" 2.9" x 2.3" 3.2" x 2.5" 2.4" x 1.7" 2.4" x 1.7"
Compression Ratio 8.5:1 8.2:1 8.0:1 8.5:1 8.5:1
Oil Alert X X X X X
Pump Type Trash Centrifugal Self-priming Trash Centrifugal Self-priming Trash Centrifugal Self-priming Diaphragm Self-priming Diaphragm Self-priming
Volute Rigid Mounted Cast Iron w/ Stainless Wear Plate Rigid Mounted Cast Iron w/ Stainless Wear Plate Rigid Mounted Cast Iron w/ Stainless Wear Plate N/A N/A
Impeller Conical Cast Iron Conical Cast Iron Conical Cast Iron N/A N/A
Mechanical Seal (Pump Case/Impeller) Silicone Carbide / Silicone Carbide Silicone Carbide / Silicone Carbide Silicone Carbide / Silicone Carbide N/A N/A
Priming Time 70 sec. @ 16.4 ft. 100 sec. @ 16.4 ft. 160 sec. @ 16.4 ft. 20 sec. at 20.0 ft. 20 sec. at 20.0 ft.
Drive System Direct Direct Direct Direct Direct
Discharge Capacity 187 gal./min. 319 gal./min. 433 gal./min. 60 gals./min. 80 gals./min.
Suction Port Diameter 2" 3" 4" 2" NPT 3" NPT
Discharge Port Diameter 2" 3" 4" 2" NPT 3" NPT
Total Head Lift 98 ft. 89 ft. 85 ft. 50 ft. 50 ft.
Suction Head Lift 26 ft. 26 ft. 26 ft. 21 ft.* 24 ft.**
Maximum Pressure 42 psi 39 psi 37 psi N/A N/A
Solids Handling 13/16 inches 1 1/16 inches 1 1/16 inches 1.8" 2.4"
Dimensions (L x W x H) 24.4 x 18.1 x 18.3 26.0 x 19.5 x 20.3 28.9 x 21.1 x 22.2 32.5" x 23.4" x 25.0" 32.5" x 23.4" x 25.0"
Dry Weight 104 lbs. 132 lbs. 172 lbs. 120.0 lbs. 120.0 lbs.
Strainer Part # 78325-YB8-003 78325-YB9-003 78325-YD4-003 M51-0000-078 M51-0000-080


* 14 ft dry, 21 ft primed
** 16 ft dry, 24 ft primed