2023 Honda Rebel 1100 Specifications

2023 Honda Rebel 1100 ABS
SPECIFICATIONS

Model

Rebel 1100 (CMX1100)

Rebel 1100 DCT (CMX1100D)

Rebel 1100T DCT (CMX1100TD)

ENGINE  
Type 1,083cc liquid-cooled Unicam® four-stroke 22.5º parallel-twin
Valve Train SOHC; four valves per cylinder
Bore x Stroke 92.0mm x 81.5mm
Compression Ratio 10.1:1
Induction PGM-FI electronic fuel injection w/ 46mm throttle bodies (Throttle By Wire)
Ignition Full transistorized ignition
Starter Electric
Transmission 6 speed manual 6 speed automatic DCT
Clutch Multiplate wet (2) multiplate wet
Final Drive 525 chain, 16T x 42T
SUSPENSION  
Front 43mm conventional telescopic fork w/ adj. preload & dark titanium oxide coating; 5.5 in. travel
Rear Dual Showa shocks w/ 12.5mm shafts & adj. preload, piggyback pressurized reservoirs; 3.7 in. travel

BRAKES  
Front Single four-piston monobloc, radial-mount hydraulic caliper w/ floating 330mm rotor; ABS
Rear Single one-piston hydraulic caliper w/ 256mm rotor; ABS
TIRES  
Front 130/70-18
Rear 180/65-16
MEASUREMENTS  
Rake (Caster Angle) 28º
Trail  110mm (4.3 in.) 
Length 88.3 in.
Width 33.6 in. 32.8 in. 33.4 in.
Height 43.9 in. 46.5 in.
Seat Height 27.5 in.
Ground Clearance  4.7 in.
Wheelbase 59.8 in.
Fuel Capacity 3.6 gal. (1.1 gal. Reserve)
Curb Weight* 487 lbs. 509 lbs. 542 lbs.
OTHER  
Colors Iridium Gray Metallic; Green Metallic Metallic Black; Bordeaux Red Metallic

*Includes all standard equipment, required fluids and full tank of fuel—ready to ride
Meets current EPA standards
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment
Specifications subject to change