Model: | ST1300 (with ABS) |
Engine Type: | 1261cc liquid-cooled longitudinally mounted 90° V-4 |
Bore and Stroke: | 78mm x 66mm |
Compression ratio: | 10.8:1 |
Valve Train: | DOHC; four valves per cylinder |
Induction: | PGM-FI with automatic enricher circuit, four 36mm throttle bodies, eight holes per injector |
Ignition: | Computer-controlled digital with 3-D mapping and electronic advance |
Transmission: | Five-speed |
Final Drive: | Shaft |
Suspension | Front: 45mm HMAS cartridge fork; 4.3 inches travel Rear: HMAS gas-charged single shock with five-position spring preload adjustability; 4.8 inches travel |
Brakes | Front: Dual full-floating 310mm discs with CBS three-piston calipers with ABS Rear: Single 316mm disc with CBS three-piston caliper with ABS |
Tires | Front: 120/70ZR-18 Rear: 170/60ZR-17 |
Wheelbase: | 58.7 inches |
Rake (Caster Angle): | 26.0° |
Trail: | 98.0mm (3.9 inches) |
Seat Height: |
31.1 inches (+/- 0.6 inch) |
Fuel Capacity: | 7.7 gallons |
Estimated Fuel Economy: | 35 mpg |
Color: | Black |
Curb Weight*: | 730 pounds |
*Includes all standard equipment, required fluids and full tank of fuel—ready to ride.
Honda's fuel-economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride; how you maintain your vehicle; weather; road conditions; tire pressure; installation of accessories; cargo, rider and passenger weight; and other factors.
Meets current CARB and EPA standards.
©2011 American Honda Motor Co., Inc. • All Rights Reserved
Specifications subject to change.