2026 Honda Gold Wing Specifications

ENGINE  
Type 1,833cc liquid-cooled, four-stroke, horizontally opposed six-cylinder
Valvetrain Unicam® SOHC; four valves per cylinder
Bore x Stroke 73.0mm x 73.0mm
Compression Ratio 10.5:1
Induction Programmed electronic fuel injection (PGM-FI); 50mm throttle body, throttle by wire (TBW)
Ignition Full transistorized
Starter Electric push-button starter w/ Integrated Starter Generator System (ISG)
Transmission Seven-speed automatic DCT w/ Walking Mode F/R Six-speed manual w/ Reverse Seven-speed automatic DCT w/ Walking Mode F/R Six-speed manual w/ Reverse
Clutch (2) multiplate wet Multiplate wet (2) multiplate wet Multiplate wet
Final Drive Shaft
SUSPENSION  
Front Double-wishbone system w/ Showa shock absorber; 4.3-inch travel
Rear Pro-Link® system w/ Showa shock absorber; 4.1-inch travel
BRAKES  
Front Dual radially mounted six-piston Nissin hydraulic calipers w/ 320mm discs; electronically controlled combined ABS
Rear Single three-piston Nissin hydraulic caliper w/ 316mm disc, electronically controlled combined ABS
TIRES  
Front 130/70-18
Rear 200/55-16
MEASUREMENTS  
Rake 30.5º 30.0º
Trail 4.33 inches (110mm) 4.29 inches (109mm) 4.33 inches (110mm)
Length 102.9 inches 97.6 inches
Width 35.6 inches 36.3 inches 35.6 inches 36.3 inches
Height 56.4 inches (windscreen in low position) 52.8 inches
Seat Height 29.3 inches
Ground Clearance  5.1 inches
Wheelbase 66.9 inches
Fuel Capacity 5.5 gallons
Curb Weight* 856 pounds 847 pounds 845 pounds 808 pounds 806 pounds
OTHER  
Colors Metallic Black Deep Pearl Gray; Metallic Black; Candy Ardent Red Matte Silver
Warranty 3 years

 

*Includes all standard equipment, required fluids and full tank of fuel—ready to ride
Meets current EPA standards
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment