2022 Honda CRF300L |
||
Model |
CRF300L ABS |
CRF300L |
ENGINE |
|
|
Type |
286 cc liquid-cooled, 25º single-cylinder four-stroke |
|
Valve Train |
DOHC; four valves |
|
Bore x Stroke |
76.0 mm x 63.0 mm |
|
Compression Ratio |
10.7:1 |
|
Induction |
PGM-FI fuel injection w/ 38 mm throttle body |
|
Ignition |
Full transistorized ignition |
|
Starter |
Electric |
|
Transmission |
6-speed manual |
|
Clutch |
Multiplate wet |
|
Final Drive |
14T/40T; #520 O-ring-sealed chain |
|
SUSPENSION |
|
|
Front |
43 mm telescopic inverted fork; 10.2 in. travel |
|
Rear |
Pro-Link® system with single shock; 10.2 in. travel |
|
BRAKES |
|
|
Front |
Single two-piston hydraulic caliper w/ 256 mm disc; ABS |
Single two-piston hydraulic caliper w/ 256 mm disc |
Rear |
Single one-piston hydraulic caliper w/ 220 mm disc; ABS |
Single one-piston hydraulic caliper w/ 220 mm disc |
TIRES |
|
|
Front |
80/100-21 |
|
Rear |
120/80-18 |
|
MEASUREMENTS |
|
|
Rake (Caster Angle) |
27.5º |
|
Trail |
109 mm |
|
Length |
87.8 in. |
|
Width |
32.2 in. |
|
Height |
47.3 in. |
|
Ground Clearance |
11.2 in. |
|
Seat Height |
34.7 in. |
|
Wheelbase |
57.2 in. |
|
Fuel Capacity |
2.1 gal. (incl. .5 gal. Reserve) |
|
Curb Weight* |
311 lbs. |
309 lbs. |
OTHER |
|
|
Color |
Red |
*Includes all standard equipment, required fluids and full tank of fuel—ready to ride
Meets current EPA standards
Models sold in California meet current CARB standards and may differ slightly due to emissions equipment Specifications subject to change
# # #
2022 Honda CRF300L Features and Benefits
- CRF300L
- CRF300L ABS
The motorcycle industry's top-selling dual-sport model, the CRF300L boasts strong power, low weight and excellent on- and off-road performance, while also delivering unparalleled value, reliability and styling. The model has styling cues that are carried over from Honda's CRF Performance line, and it's available in standard and ABS versions, both of which are ready to provide low-cost transportation and true dual-sport adventure.
STYLING
Through its bodywork and red, white, black and blue graphics, the CRF300L is designed to mimic the look of the CRF Performance line, including the Baja-dominating CRF450X.
Riding Position
The riding position enables good rider input and vehicle maneuverability. Handlebar sweep allows a natural elbow position and light steering, and handlebar weights reduce vibration. The rear and middle of the seat are relatively wide for comfort, while the front area is slim for good rider input via the thighs and knees. Passenger pegs are provided.
Meter
The meter features black characters on a white background, and characters are large for good visibility. In addition to speed, clock and rpm readings, functions include gear position, fuel mileage and fuel consumption.
ENGINE / DRIVETRAIN
The liquid-cooled, single-cylinder, four-stroke power plant, has bore-and-stroke figures of 76.0 mm and 63.0 mm, respectively, for a 286 cc displacement. Power output is particularly strong in the rev range's lower and middle areas, which are used often in both city riding and off-road going.
A large, 38 mm throttle body helps to achieve rider-friendly throttle control, especially at low rpm, and the exhaust system delivers low sound output while keeping vibrations to a minimum. The engine features a valve train with a rocker-arm design, enabling a compact cylinder head, while the counterbalancer provides smooth running.
Transmission
The six-speed gearbox features close spacing in the lower gears and wide spacing in the higher gears, enabling optimum gear selection while still allowing comfortable high-speed cruising—a great balance between suitability for city, long-distance and off-road applications.
Clutch
The CRF300L has a very light clutch-lever pull, thanks in part to an assist/slipper clutch that also provides good performance during aggressive downshifting.
CHASSIS / SUSPENSION
Overall vehicle weight is low, thanks to careful selection of components. For example, the lower triple clamp is constructed from aluminum instead of steel, minimizing steering effort and keeping the center of gravity low.
Frame / Swingarm
Through optimization of its main components, the frame's weight is minimized, while optimized lateral rigidity allows maneuverability and good rider feel. Diameter of the cradle tubes is 25.4 mm. In addition, ground clearance is a considerable 11.2 inches, reducing the chance of interference during riding in rough off-road conditions. Similarly, the swingarm's lateral and torsional rigidity are optimized, and its overall cross section is designed to deliver a uniform distribution of twist, resulting in good feel and predictable handling. The swingarm's weight is low, minimizing sprung weight for excellent suspension action.
Suspension
A 43 mm inverted Showa fork is paired with a Pro-Link® single-shock rear system. Front and rear suspension travel are both 10.2 inches for excellent performance, particularly during off-road riding.
Wheels / Brakes
As with high-performance off-road machines, the wheel sizes are 21 inches at the front and 18 inches rear, enabling smooth rolling over rough terrain. The black aluminum rims have been polished, resulting in a glossy appearance and easy cleaning. The rear axle is hollow to minimize unsprung weight.
Hydraulic brakes are used front and rear, with 256 and 220 mm rotors, respectively, and available ABS for smooth, controlled stops in varying conditions. The rear-brake master cylinder incorporates the reservoir, similar to the design used on the CRF Performance line, for a simple, clean design. Conveniently, ABS can be turned off at the rear, providing a different riding feel in off-road conditions.
ACCESSORIES
A number of Honda Accessories are offered, including hand guards, a skid plate, an electrical socket, wider foot pegs, a top box, a rack and more.
- Meets current EPA and CARB standards
- California version differs slightly due to emissions equipment